Basic Info.
Type
LZ Straight-Line Metal Drawing Machine
Usage
Wire, Rope Wire, Prestressed Steel Wire, Standard Parts, Welding Wire, Gas Shielded Welding Wire, Aluminum
Outlet Diameter
0.1-1.2mm
Max.Inlet Wire Dia.
2.8mm
Cost Effective
Excellent Design of Die Holder, Precisely Manufact
Used for
Drawing Welding Wire, Gas Shielded Welding Wire
Using
Aluminum Wire, Prestressed Steel Wire, Steel Wire
Control System
PLC, Ipc, High Speed I/O, Network
Specification
ISO 9001: 2008
Product Description
Dry drawing machine/Straight line drawing machine
The series of dry wire drawing machine (DD) manufactured by BSMT is dancer controlled with a max. 20mm of wire inlet and a minimum 0.15mm of wire exit.
Suitable for drawing 0.15 ~ 20 mm metal wire. Including medicine wire welding wire, gas shielded welding wire, aluminum wire, prestressed steel wire, steel wire rope, spring wire, stainless steel wire, cord, steel wire, double wire, and so on.
Advantage:
Capstans:
Capstan coating: manganese steel or Tungsten carbide coating;
The capstan design permits perfect contact with the wire.
"Narrow Gap" cooling principle with rust-resistant inner jacket.
High capstans for large cooling surface
Equipped with ring cast.
Narrow Gap
2. cooling
Cooling of capstans and drawing dies:
Separate cooling water lines for capstans and dies;
3. Synchronisation:
Dancer wheels or rollers with air cylinder;
4. Soap boxes
For single dies or for pressure dies;
The first soapbox fitted with a large soap container with pressure rollers;
Soap stirrer;
Rotating pressure dies (optional);
Temperature detection for central drawing die cooling (optional);
5. frame and screen
no ground works required.
Fully encapsulated
6. drive :
Gear box and belt drive (low speed passes)
Belt drive (high speed passes)
take-up machine( Coil )
| LZE | LZD | LZC | LZB | LZA |
Capstan type | 160/200/250/300 | 300/350/400 | 400/450/550 | 550/620/710 | 710/900/1200 |
Drawing passes | <13 | <13 | <13 | <13 | <13 |
Wire inlet strength(N/mm 2 ) | ≤ 1350 | ≤ 1350 | ≤ 1300 | ≤ 1300 | ≤ 1100 |
Max wire diameter inlet(mm) | 2 | 4 | 6.5 | 10 | 20 |
Min wire diameter exit (mm) | 0.15 | 0.3 | 0.5 | 1 | 2 |
Max total wire reduction (%) | 94 | 94 | 94 | 94 | 94 |
Max speed (m/min) | 1000 | 1200 | 1200 | 600 | 600 |
Motor power(KW) | 1.5-5.5 | 5.5-15 | 7.5-45 | 30-55 | 45-160 |
Type of take up | Spool/stripper capstan | Spool/stripper capstan | Spool/Spider | Spool/Spider | Spool |
Control system | PLC, IPC, high speed I/O, network |
Noise lever(dB) | Below 82 |
Address:
28-1guihua Road, Zhonglou Econimic Development Zone, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14000
Company Introduction:
BE-STAR Machinery Technology Co., Ltd. Was established in February 2010, Our factory locate in 28 -1Guihua Road, Zhonglou Economic Development Zone, Changzhou City. It occupies 100 Chinese Mu (18 acre), while the floorage occupies 30000 square meters. Our main business is: Manufacturing and marketing for ferrous and non-ferrous metal wires, ropes and cables; Silicon cutting equipment, the relevant parts and after-sale service.
BE-STAR Machinery Technology Co., Ltd. is the worldwide leading supplier for its technology in wire manufacturing and silicon cutting, which are mainly applied to industries including PV cell cutting wire, steel radial tire cord, silicon slice, and special rare metal wire. We have three series of products with high technological, manufacturing equipment for cutting wires, manufacturing equipment for steel cords, and silicon/sapphire slicing equipment. The operating platforms are controlled by high-configuration computer. With the major technical indexes are in an advanced level among the similar international products, the whole competitiveness home and aboard are in an advanced level as well.
Based on technology creation, we have a professional development team. At present, the average age of our 50 members is thirty. The intensity and vigor team divided into a series of groups for work, such as machinery group, automation group and process group, etc. Our team had completed the research and development of dozens products in three series in the past two years, we are approved by conformity of high and new-tech enterprise in November 2011. Now, Research and Development Centre with an area of 1, 800m2 has been completed. The procurement of facilities and equipment are in place, as well as some related staff, which aims for the improvement in technological innovation and accelerate the development of technological research, as a result, attempt to be the leader with our own technology in special wires manufacturing and polycrystalline silicon cutting field.
Our main customers are dominated by the companies which focus on manufacturing steel products and photovoltaic products at home and abroad, especially by medium to large size companies. In order to ensure its leading status in the industry and enhance its competitiveness in domestic market, we plans to commit amount money o n research and development of new products., coming out with several new products every year. We
Adopted strong technological home and abroad to minimize the cost to create maximum profits with best quality, we are attempting to be the leader in this field at home and abroad in the coming five years.
The social responsibilities BE-STAR shoulder are important with its aim to improve the whole competitiveness home and aboard while during its development, to make its effort to upgrade industry. With the best quality and best service, we sincerely wish to establish friendly partnership with friends from all walks of life home and abroad and agents in the same business for common development and a bright future.